|
|
Post by dave632 on Sept 6, 2020 9:44:30 GMT -7
Here are my Entries for Jeff's race or an invasion of 55 Chevy's. The 55 Coupe is my new 3G list race car which is an equal to the old rebel 57 Chevy, hit a .57 @ 27 MPH @ 20V not 18. The 2 convertibles are for the Pro Mod 2.5 class, the Vicky and blue Dragster are for the 4G Super comp class. Stole the chassis out of Jungle Jim's car for the Vicky.  Entries for Jeff's race |
|
|
|
Post by dave632 on Sept 8, 2020 10:32:34 GMT -7
Cars will be shipping out tomorrow. Should be there in plenty of time but
the USPS has been a little crazy lately. Clives cars were sent all over the
country for no good reason at the last race.
|
|
|
|
Post by dave632 on Sept 9, 2020 8:37:57 GMT -7
Priority Tracking # 9405828206335316498149
|
|
|
|
Post by GTS on Sept 10, 2020 16:53:26 GMT -7
I would like to get an idea of how many Unlimited 4 gear cars that are going to make it to the race to see if there will be enough to make it a third Class. So let me know here on the Sign Up thread if ya'll could. Thanks!
I won't be sending an Unlimited 4 gear car  . |
|
|
|
Post by dave632 on Sept 11, 2020 8:02:46 GMT -7
Mine is on the way. Sorry to hear yours won't make it Gale. I stuck with a stock top plate and gave up some ET due to low traction tires.
Seemed to hold up OK but I tested at 20v not 26. Did try one run at 26v and all it did was spin the tires harder doing a lot of screaming going down the track.
I am happy that my home wound 1 ohm arm seems to be holding up well.
|
|
|
|
Post by gnome on Sept 12, 2020 6:55:37 GMT -7
Mine is on the way. Sorry to hear yours won't make it Gale. I stuck with a stock top plate and gave up some ET due to low traction tires. Seemed to hold up OK but I tested at 20v not 26. Did try one run at 26v and all it did was spin the tires harder doing a lot of screaming going down the track. I am happy that my home wound 1 ohm arm seems to be holding up well. What wire size and length did you use to come up with one ohm |
|
|
|
Post by dave632 on Sept 12, 2020 8:17:14 GMT -7
Wire size was #32. Don't remember exact length, think it was around 4 - 4.5'.
|
|
|
|
Post by ecbill on Sept 12, 2020 10:38:26 GMT -7
Refresh my memory. It seems like 1000’ 1/64 scale is15’ 7.75”. Is that correct?
|
|
|
|
Post by dave632 on Sept 12, 2020 11:22:29 GMT -7
I think it's 15' 7 1/2"
|
|
|
|
Post by AJR on Sept 12, 2020 13:34:49 GMT -7
I believe Dave is correct. Bear Creek is actually 15' 7''. |
|
|
|
Post by AJR on Sept 12, 2020 13:42:32 GMT -7
Priority Tracking # 9405828206335316498149 Dave your cars showed up today safe and sound. Not going to unpack anything till we get closer to the race. At which time I will post arrival pics. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 12, 2020 13:53:28 GMT -7
concur ..... 1/64 scale 1000 feet equals 15.625 feet.
15 feet 7.5 inches.
|
|
|
|
Post by AJR on Sept 12, 2020 14:41:37 GMT -7
***ATTENTION RACERS***We are 20 days counting today away from the NTRA Texas Nationals Raceday! I will start to turn my focus to race preparation in the next week or so. Not sure if I am going to do trophies for this one?? I have an idea for something that we used to do but it might just end up being about bragging rights. There will be some Angry Jeff Racing giveaways though!Please don't forget to mail early to offset any mail delays. Don't forget your return shipping/entry of $8.00. My Paypal is genjj1963@att.net if you prefer to send it that way. I will list the race address below.Jeff Wallace410 Harrington LaneEuless, Texas 76039I've decided to just wait and see who sends the Unlimited 4 gears before I decide to run them in a Class or Match Races. But keep engineering those builds whether you're sending a car now or not. I will run these again at the Winter Nationals 2021! Maybe an end of the year 4 gear Unlimited Bash....who knows!! We will have plenty of exciting fast runs with the Inline 2.5 Super Comp and 4 gear Super Comp Classes. I have taken time off from work to focus totally on the race. There will be plenty of pics and commentary with slo mo vids of the Finals and any other important races. I plan on having the camera running for every 4g Unlimited race to capture any of the excitement that may happen. It's going to be fun and it will start Thursday October 1st at Bear Creek Dragway North Texas. We are expecting to see some cool cars and great builds. Sooooooo.....as we say here at Bear Creek.....Be there or Be square!!!Link to the 2019 NTRA Texas Nationals
nitroslots.com/thread/4627/texas-nationals-creek-dragway-thread
|
|
|
|
Post by AJR on Sept 12, 2020 17:13:19 GMT -7
***ATTENTION PSO AND 4GO LIST RACERS***
This is a List Race Event!!
Both Pro Street Outlaw and Four Gear Outlaw will be running after all Class and Match races have concluded.
If you're not on a List then build a car to NTRA Comp rules and get in the Shark Pool for a chance to Call Out the #10 spot on one of the Lists. It's easy......just build a car and I can help you with the rest. It's always highly competitive and cool to see the progression of the cars. Gauge where you're at among the other racers on the List!!
Still plenty of time !!
Track records up for grabs for this event:
Unlimited 4 Gear .484ET @ 26v JJWallace 2015 NTRA Winter Nationals
Pro Street Outlaw/NTRA Pancak Comp .5882ET @ 18v Nosubfor3 2018 NTRA Winter Nationals
Four Gear Outlaw/NTRA Pancake Comp .6561ET @ 20v Hairy Canary 2018 NTRA Winter Nationals
|
|
|
|
Post by dave632 on Sept 13, 2020 9:03:28 GMT -7
Priority Tracking # 9405828206335316498149 Dave your cars showed up today safe and sound. Not going to unpack anything till we get closer to the race. At which time I will post arrival pics. Glad to hear that. Never know what will happen lately with the mail. |
|
.
