|
|
Post by dave632 on May 11, 2021 9:38:41 GMT -7
Here are first arrival Gibbo61's cars on the trailer ready to rock. Gibbo is also a sponsor of the race sending in a bunch of goodies.  Gibbo61 |
|
|
|
Post by hairycanary on May 11, 2021 21:11:51 GMT -7
Well, the pancake unlimited car is coming right along. Its a Tjet chassis with the aluminum gear plate. Had to do some mods/repairs to the gear plate. Idler gear post was way too sloppy. Gear flopped about. Was thinking about drilling out a Magnatraction gear with the small hole for a tighter fit. Bushing for the rear cluster had a lot of vertical slop, causing gear mesh misalignment. Looks like the bushing was secured by super glue which failed. Ended up soldering it in place. Right now its fastest time should make it pretty darn competitive, in the Gasser class.   We wont even discuss its slowest times. Certainly wont be pulling a "swiftkart" in this class.  Havin' fun anyhow! Bill I started on my Tjet unlimited on Sunday and had the same problem you did. The idler post is ok so far, the cluster bushing came loose and pushed the cluster assembly up and goofed up the pinion gear, the crown survived both beatings. Tried loctite and same thing. So I to soldered it. I took a small brass washer and put it on the bottom side and soldered it to the bushing and has been good so far. I end up doing the shunt soldered to the rivet and I made 30 runs at 20volts and thought while I’m not making any progress I wound upping the voltage to 24 V and made 10 more runs and still no heat issues. And it has a 1ohm arm in it. So that’s hotter than the others I tried in the 4G unlimited I was having heat issues with. I’m going to try and get my 4G unlimited ready and send it also ? Rick Rick |
|
|
|
Post by dave632 on May 12, 2021 6:26:59 GMT -7
The pancake Unlimiteds are sure giving us all some fits but that is what makes it interesting. It is what was called Hot Rodding in the past and
many innovations that Hot Rodders made passed on down to the Auto industry.
|
|
|
|
Post by dave632 on May 12, 2021 8:40:11 GMT -7
DynoMike's cars have arrived with prizes for the other entrants, good luck at the races DynoMike.  DynoMike
|
|
|
|
Post by GTS on May 13, 2021 11:34:51 GMT -7
Hiya Dave, Package with proxy race cars and sponsor goodies will be going to the PO tomorrow. You should see it next week.
Enjoy!
|
|
|
|
Post by dave632 on May 13, 2021 14:23:50 GMT -7
|
|
|
|
Post by sandfly on May 13, 2021 17:28:27 GMT -7
There's some good looking cars right there.
|
|
|
|
Post by ecbill on May 13, 2021 20:12:38 GMT -7
|
|
|
|
Post by dave632 on May 14, 2021 11:54:28 GMT -7
If all the cars show up we will have 100 entries for this race, not counting the Outlaws.
|
|
|
|
Post by sandfly on May 14, 2021 18:07:57 GMT -7
|
|
|
|
Post by chriskingsley65 on May 15, 2021 5:45:41 GMT -7
Hey dave just want to tell you what i will be sending to you.
2 = 2.5
2=stock
1=pancake unlimited
1= 4g outlaw
They should be on the the way to you today or monday.
|
|
|
|
Post by AJR on May 15, 2021 8:36:05 GMT -7
A lot of nice looking cars right there!! I'm late  ! Normally my cars would have been in the mail yesterday. Today is all that is HO drag slot cars in Euless, Texas. I will be finishing up all of my entries today and they will be in the mail Monday morning along with some sponsor stuff. I am excited for the race especially after attending the C10 Nationals at Texas Motor Speedway yesterday. I will post some pics later today of some of those bada$$ rides! The 3g Unlimited build is showing some promise. I don't think it's fast enough to win anything but I hope to have it respectable. I'm thinking a winning time will need to be in the .3's and I'm not there yet. I'm looking forward to seeing everyone's cars! |
|
|
|
Post by dave632 on May 15, 2021 13:16:59 GMT -7
KStocks entires arrived today, good luck at the race KStocks:  KStocks entries |
|
|
|
Post by dave632 on May 15, 2021 14:19:31 GMT -7
|
|
|
|
Post by swiftkart on May 15, 2021 19:34:09 GMT -7
Everyone's cars are looking great!
Got my cars boxed and label printed, I will put it in a drop box tomorrow. 9405 8036 9930 0794 2138 46
I like the Idea of 20V for Unlimited Pancake, it should allow more cars to finish!
|
|
 We wont even discuss its slowest times. Certainly wont be pulling a "swiftkart" in this class. 
! Normally my cars would have been in the mail yesterday. Today is all that is HO drag slot cars in Euless, Texas. I will be finishing up all of my entries today and they will be in the mail Monday morning along with some sponsor stuff. I am excited for the race especially after attending the C10 Nationals at Texas Motor Speedway yesterday. I will post some pics later today of some of those bada$$ rides! The 3g Unlimited build is showing some promise. I don't think it's fast enough to win anything but I hope to have it respectable. I'm thinking a winning time will need to be in the .3's and I'm not there yet. I'm looking forward to seeing everyone's cars!