|
|
Post by cozwurth on Jan 12, 2024 8:48:32 GMT -7
Adam, I'd like to run 2 T-jets. Looking forward to the race!
|
|
|
|
Post by Racin' Rob on Jan 12, 2024 18:18:45 GMT -7
I would like to enter 2 dragsters and 2 T-jets.
|
|
|
|
Post by pennywize619 on Jan 13, 2024 1:15:57 GMT -7
Ecbill, Crazynski, Cozwurthz and RR you're all in!
|
|
|
|
Post by skillet on Jan 13, 2024 6:24:05 GMT -7
We decided not to exchange them this time Ken. It turned into of just getting who needed what to get the new class started.
|
|
|
|
Post by skillet on Jan 13, 2024 6:25:22 GMT -7
Fill me up Adam. 2 dragster may not be fast but I'm hoping pretty lmaooooo
|
|
|
|
Post by pennywize619 on Jan 13, 2024 6:39:21 GMT -7
I got you down for 2 tjets also Sam. I'm sure you have 2 just sitting around lol.
|
|
|
|
Post by mazda on Jan 13, 2024 8:05:24 GMT -7
Can I just ask about P/U magnets. Where are they allowed to be fitted?  |
|
|
|
Post by skillet on Jan 13, 2024 8:48:59 GMT -7
They go in those pockets in the front over the shoes... im going to have to get you some if you want to try them?
Sorry I should have thought about that for you and big Ken.
I haven't tried them yet but honestly thinking the wheelie bar and lowered traction magnets is the way. I could most definitely be wrong.
|
|
|
|
Post by dave632 on Jan 13, 2024 9:23:37 GMT -7
Count me in for 2 of each. I surely don't have any stock T jets, but I will put something together. Are Dash, and other similar T jets allowed?
|
|
|
|
Post by pennywize619 on Jan 13, 2024 10:06:01 GMT -7
Count me in for 2 of each. I surely don't have any stock T jets, but I will put something together. Are Dash, and other similar T jets allowed? Dave632 you're in! I have no issue with Dash and similar chassis. |
|
|
|
Post by Racin' Rob on Jan 13, 2024 11:24:58 GMT -7
They go in those pockets in the front over the shoes... im going to have to get you some if you want to try them? Sorry I should have thought about that for you and big Ken. I haven't tried them yet but honestly thinking the wheelie bar and lowered traction magnets is the way. I could most definitely be wrong. Wheelie bars don't help in the stock class, when trying to run .610 tires. If you want to run the big tires in the stock class, seems like pickup mags are going to be a part of the solution. |
|
|
|
Post by skillet on Jan 13, 2024 17:21:38 GMT -7
Thank you for sharing that Racing Rob.
I haven't tried the bigger tire in stock yet
|
|
|
|
Post by dave632 on Jan 13, 2024 18:09:00 GMT -7
I found a DR chassis I have that has big foot brushes. Will that be allowed at this race?
I had to glue the stock brush tubes in place as they were rotating like a top. I also had to use red loctite on the adjustment screw to stop the adjustors from running out.
Can traction magnets be added outside the chassis in stock location underneath the poorly placed stock magnets, dumbest place to put the stock traction magnets I have seen on any chassis as it kills the desired effect. This will save cutting the chassis to drop the magnets.
|
|
|
|
Post by pennywize619 on Jan 14, 2024 1:16:10 GMT -7
The rules say any electrical so I'm good with the Bigfoot brushes. Other than moving the traction magnets down the rules don't allow for other movement.
|
|
|
|
Post by skillet on Jan 14, 2024 3:30:25 GMT -7
You would have to cut the chassis. We're trying to get away from stacked magnets... stacked magnets have different effects by adding more magnets to the overall magnetic feild. So if we just use the two and move them up and down we still only have 2 traction magnets, unless p/u magnets are being used.
|
|
